![]() ![]() The buzzer can be heard all the way from our bedroom upstairs to the room in the back of our home downstairs. This alarm clock definitely fits the bill. It often takes me there to five minutes to wake up once my alarm starts going off, so I need it to be as loud and annoying as possible. I find that the maximum is really loud, which is great for a very sound sleeper such as myself. Unfortunately, there’s no way to know how loud each level is unless you test it yourself by setting the alarm for a minute or two ahead of the current time and waiting for it to sound. For the alarm volume, you can choose the minimum, maximum, or a level in between. You can only choose to have the alarm sound everyday, weekdays (Monday through Friday), or just weekends (Saturday and Sunday).Īs far as the alarm tone, you can choose buzzer, radio or USB. When choosing the days of the week for the alarm to sound, you cannot choose individual days which is a little inconvenient – especially if you have a day off during the week. This is great for two people who are sharing the alarm clock, if you have a job where some days you open and some days you close, or if you work Monday through Friday and like to sleep in on the weekend. What’s cool about this is that there are two different alarms. The hour digits begin to blink, and then you can cycle through the hours, minutes, days of the week that you want the alarm to sound, alarm tone, and alarm volume. Setting up the alarms is pretty much the same as setting the time except you press and hold down the alarm button of choice: Alarm 1 or Alarm 2. I haven’t tried this, but it does seem like a very handy feature. Tune to an RDS radio station that transmits a time signal, and then press the “Set” button the alarm clock will read the RDS time automatically. There’s also the option to synchronize the time with that on the RDS station. ![]() If you go fifteen seconds without pressing a button, the clock will exit setup and you’ll have to start over, so be mindful of that. When cycling through each option, use the “Back / Forward” buttons to choose an option, then use the “Set” button to confirm the option. It then goes through the hour, minute, month, day, and year. It starts by letting you choose either 12H or 24H format for the time. The panel will start to blink, and you can cycle through each option. In standby mode, press and hold the “Set” button for two seconds. Setting the clock is really easy once you get the hang of it. This is done by holding down the “Power” button for a few seconds. ![]() In this mode, only the time will be displayed on the panel. radio, USB, Bluetooth).Īdditionally, you can put the alarm clock in standby mode whenever you want. This turns the alarm clock to the last selected source (e.g. Finally, you can turn it on by pressing the “Power” button. Next, you’ll want to connect the AC adapter and plug it into an outlet. This is easy to do simply uncrew the compartment cover and remove the plastic tab. You’ll just need to pull out the plastic tab so that it will work. Thankfully, it comes with the battery already in place you don’t have to supply it. The alarm clock has a display panel that is powered by a lithium CR2025 battery. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |